Acid Cellulase for bio-polishing SUKACell-L1000

SUKACell-L1000 is an enzyme preparation is widely used in textile and garment stone wash industries and used for biopolishing.

      

                                                                  SUKACell-L1000
                                                        Acid Cellulase for bio-polishing

INTRODUCTION:
SUKACell-L1000 is an enzyme preparation obtained from the submerged fermentation of a high cellulase-producing microbial strain. It is widely used in textile and garment stone wash industries.
PROPERTIES
SUKACell-L1000 will function from a pH of 4.5 to 6.0 with pH 4.8 as an optimum. It will function from 40 celsius  to 60 celsius
Appearance: Medium to dark amber liquid (Note that color does not affect or reflect activity.)
Odor: Slight fermentation odor
pH (as is):3.5-5.5
Density:1.05-1.20
SPECIFICATION:
SUKACell-L1000 (activity is 4000 U/ml)
High activity product is available upon request of our customers.
ENZYME ACTIVITY UNIT DEFINITION:
Reducing sugar method At a pH of 4.8 and temperature of 50 celsius , to produce the amount of reducing sugar equivalent to 1 mg glucose, it needs l g solid enzyme (or 1mL liquid enzyme) and 1 h hydrolyze sodium carboxymethy l cellulose substrate, as 1 enzyme activity unit, state as u/g (or u/mL). CMCA – DNS for short.
EXECUTION STANDARD
This product follows the industry standard of PRC as QB 2583 2003
USAGE:
?SUKACell-L1000 - is a kind of acidic liquid cellulase, used for biofinishing, significantly soften 100% cotton fabrics, both woven and knits.
?SUKACell-L1000 – provide soft touch except used for jean leaven dye processing.
  SUKACell-L1000 - can obviously improve clothing surface magnitude.
OPERATION & DOSAGE:OPERATION

DOSAGE Biofinishing Stonewashing
Desize thoroughly Desize thoroughly Desize thoroughly
Drain liquor then fill machine to liquor ratio of 1:8-1:15 (jean/ water) 1:6-1:10 (jean/ water)
Add pumice (if required), heat bath to 40-60 celsius  50-60 celsius
Add SUKACell-L1000
at the rate of 0.25-2.0% owg 0.25-0.75% owg
Adjust pH to 4.5-5.5, with pH 4.8 as an optimum 4.5-5.5, with pH 4.8 as an optimum
Process time 20-45 minutes
(depending on desired effect) 30-45 minutes
(depending on desired effect)
After drainage add water and softening add water and softening
NOTE: Some denim fabrics of lower quality may have severe backstaining problems that can be overcome with our ES resist.
Use soda ash 1-3 grams and resist ES 1-2 grams (water ratio) to wash out ferment remaining residue, after that you can adopt our consistent lubricant/ film/ organic silicon oil.
The information presented is believed to be accurate. However, said information and products are offered without warranty or guarantee. Sales commitment should pay legal responsibility. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale.
PACKAGING
SUKACell-L1000 is packaged in 25 kg plastic drum and 1 ton plastic drum for the liquid form.
Alternative packaging is available upon request for smaller or larger volumes.
STORAGE
 Store in a cool, dry place and away from direct sunlight. SUKACell-L1000 maintains its activity for considerably longer time when stored at lower temperatures (below 25 celsius ). Do not let freeze.
HANDLING PRECAUTIONS
SUKACell-L1000 is non-toxic and biodegradable. However, unnecessary contact with the product should be avoided. Long term exposure to protein based products such as SUKACell-L1000 may sensitize certain individuals to the product. Wash hands with warm soapy water after handling. Keep out of reach of children.
TECHNICAL SERVICE
SUKAHAN (Weifang) Bio-Technology Co., Ltd will assist customers with the use of our products in applications development.